Turning Point Express Mach3 3-Blade Stainless Steel Propeller — 3" Gearcase — Johnson/Suzuki Applications — 10.5 x 11 — 31221111

$282.60 $452.00

Very low stock

- Ships same or next business day while supplies last.

Select propeller

🛡️ PARTSDUCK Promise - Best price, great support & more

More than just a price match! Best price, fast shipping, great stock, real support. More Here

Free Shipping Over $99

In stock items ship same or next business day from the closest of our 20+ warehouses with stock. Economy Shipping is free over $99.

Phone Support (856) 666-7986

Call us with questions 9-5 Monday - Friday EST.

(856) 666-7986

No Fee Returns for 30 Days

No restocking fees on most items, full Return Policy

Description

The Turning Point Express Mach3 EX3 is a 3-blade stainless steel propeller housing in the 3-inch gearcase family. Compare the available pitch and rotation with your engine requirements and loaded boating conditions. Engine fitment requires the correct separate installation/hub kit; gearcase family or horsepower alone does not establish compatibility.

Sold as one propeller housing. The engine-specific hub/installation kit is required and sold separately. Choose the exact propeller from the dropdown. Each choice lists diameter x pitch, rotation and manufacturer part number; use the specification table below to compare.

Exact specifications by part number

Part number	PartsDuck SKU	Diameter	Pitch	Rotation	Material	Blades
31221111	PD-64481	10.5 in	11 in	Right Hand	Stainless Steel	3

Design details

Separate prop housing and engine-specific installation kit allow the hub and prop to be selected for the application.
TP17 stainless-steel construction.
MaxSpeed balancing process.

Performance depends on hull, engine, load, mounting height and trim. A different blade count or design may require a different pitch even when replacing a prop with the same stamped pitch.

Hub and engine compatibility

Start with the exact engine manufacturer, model, year, gearcase and shaft spline count in Prop Wizard. The following kit references are application-dependent choices, not a list of interchangeable hubs. Applications marked four-blade-only or OS-only require that specified prop design.

Hub kit and engine application chart — EX3 prop housing
Engine application and fitment requirements	Shop hub kit
10-spline Johnson 4-stroke 25/30; Suzuki DT20/25/25C/30/30C (1987+) and DF25/30 hp. Hustler R3 / Express EX3, 3-inch gearcase family.	Kit 26 — 11200600

Choosing pitch and rotation

Record the current prop part number, diameter, pitch and rotation.
Check the engine maker’s recommended wide-open-throttle RPM range and record actual RPM and GPS speed with the normal passenger, fuel and gear load.
Use Prop Wizard with the exact engine and boat details; do not select by horsepower alone.
Confirm right-hand or left-hand rotation, particularly on twin-engine installations. Left-hand is not a substitute for right-hand.
After installation, water-test under normal load and confirm operation within the engine maker’s RPM range.

Installation and package

Package: one propeller housing. Hub kit and engine-specific installation hardware are separate. Follow the installation-kit instructions and engine manual for washer order, shaft preparation, retaining hardware, torque and locking procedure. Check full rotation and trim-tab clearance before operation. Do not assume the old hub or hardware will fit the new prop.

Fitment tools and documents

California Proposition 65

Warning WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.