Starbrite General Purpose Epoxy | 093401

General-purpose epoxy for rigid bonding repairs on compatible fiberglass, glass, ceramic, metal and most hard plastics. The product sets rigid and is not appropriate for flexible materials. Follow the package instructions for preparation, mixing and cure time.

Product Details

Before Use

Read and follow the package label, including surface restrictions, preparation and safety precautions. Use only as directed.

Application and Use Limits

Bonding surfaces should be clean and dry. Roughen smooth surfaces with a suitable abrasive or sandpaper before bonding. The manufacturer diagram gives a positioning time of 2-3 minutes. The package states a 5-minute set; this is not a verified full-cure or load-bearing time. Follow the supplied package label before putting the repair into service.

Dispenser Preparation

The manufacturer describes removing the storage cap from the plunger tubes, then opening the dispensing tips while pointing them away from the face and body and toward a mixing container. Follow the supplied package instructions for surface preparation, dispensing, mixing and cure time.

Safety and Manufacturer Documents

Warning: the resin and hardener can irritate skin and eyes and cause an allergic skin reaction. The hardener is harmful if swallowed. Avoid breathing vapor or mist and use suitable protective gloves, clothing and eye/face protection. Read both component sections in the complete safety document before use.

Manufacturer Safety Data Sheets — Resin and Hardener, North America, English

Manufacturer California Warning

WARNING: Cancer and Reproductive Harm — P65Warnings.ca.gov.