Lumitec SeaBlazeX2 Spectrum LED Underwater Light - Full-Color RGBW [101515]

SeaBlaze X2 LED Underwater Light - Spectrum

Surface-mount underwater lighting in a bronze housing. Select dual-color White/Blue or full-color Spectrum RGBW to match the desired effect and control system. A light fixture is supplied, not a complete boat-wide lighting system.

Selection and control

• Light output: RGBW Spectrum.
• Housing / finish: Bronze.
• Power supply: 10-30 vDC.
• PLI-enabled for compatible Poco digital control. A compatible Poco module is required for digital control and is not implied to be included with a light fixture.
• Supports Lumitec TTP switch control. Follow the model-specific instructions for the switching sequence.
• Lumitec does not specify this model for third-party dimmer control.

Specifications

Lumen ratings refer to white-light output where applicable; they do not describe the brightness of every color.

Part identification

• Manufacturer part number: 101515
• PartsDuck SKU: PD-69924
• UPC: 089300015150

Application and installation planning

The SeaBlaze X2 combines a bronze surface-mount housing with an internal driver. White/Blue and Spectrum versions share the family design but provide different color choices.

Use the linked SeaBlazeX2 installation guide for the correct mounting and wiring configuration. Plan the wiring run, circuit protection and access for installation before drilling or connecting power.

Lumitec recommends transom placement approximately 6–12 inches below the waterline, clear of engines and trim tabs. These surface-mount lights are not recommended for running surfaces. Water conditions and light spacing affect the visible result.

What is included?

One SeaBlaze X2 fixture with a 5-foot cable, three #10 × 1.5-inch silicon-bronze screws, rubber strain relief and instruction sheet, as listed in the X2 guide.

Common questions

Do I have to buy Poco to use it?
Compatible switch operation is available; Poco is an optional way to add supported digital color and scene control. Follow the X2 wiring configuration, not X3 instructions.

Do I need Poco for basic operation?
This model supports TTP switch control as well as compatible Poco digital control. Follow the exact model’s switching instructions; a Poco module is needed for the digital-control option.

Can I add a conventional third-party dimmer?
The exact manufacturer specification marks third-party dimmer compatibility as No. Use the supported control method for this model.

Manufacturer warranty

Lumitec states that products purchased from January 1, 2025 onward carry a five-year limited manufacturer warranty for the original purchaser. Earlier purchases retain their applicable original coverage. Keep proof of purchase and obtain a return authorization before a warranty return. Coverage terms and exclusions are available from Lumitec warranty support.

Documents and support

Lumitec SeaBlazeX2 Guide — mounting, wiring and troubleshooting

• Brochure (pdf)
• Lumitec product specifications
• Lumitec 2026 product guide (PDF)

Product videos

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Manufacturer installation resources

• SeaBlazeX2 Installation Instructions (PDF)

Older instruction sheets may show the warranty terms in effect when they were printed. See the current manufacturer warranty policy above for purchase-date coverage.