{"title":"Sea Hawk Marine Paint and Coatings","description":"\u003cp\u003eShop Sea Hawk antifouling bottom paints, primers, reducers and surface preparation products.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\/collections\/sea-hawk-bottom-paint\"\u003eSea Hawk bottom paint\u003c\/a\u003e · \u003ca href=\"\/pages\/bottom-paint-finder\"\u003eFind bottom paint for your boat\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"sea-hawk-colorkote-antifouling-bottom-paint","title":"Sea Hawk Colorkote Antifouling Bottom Paint","description":"\u003cp\u003eA self-polishing triple-biocide antifouling for properly prepared aluminum, fiberglass, wood and steel hulls in fresh, brackish and salt water. It allows hauling and relaunching without loss of antifouling performance.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e330 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e425 sq. ft.\/gallon at 2 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eThinner\u003c\/th\u003e\n\u003ctd\u003e2053 where permitted by the label; maximum specified reduction applies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e4901\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e4901\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e4902\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e4902\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e4903\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e4903\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003ctd\u003e4904\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eYellow\u003c\/td\u003e\n\u003ctd\u003e4904\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDeep Black\u003c\/td\u003e\n\u003ctd\u003e4905\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDeep Black\u003c\/td\u003e\n\u003ctd\u003e4905\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBright White\u003c\/td\u003e\n\u003ctd\u003e4910\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBright White\u003c\/td\u003e\n\u003ctd\u003e4910\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eAt a substrate temperature of 73°F (23°C), the technical sheet lists 2 hours to touch dry, 5 hours minimum before recoating and 12 hours minimum before launching. Use the full label schedule for the actual temperature, film thickness and application conditions.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Red","offer_id":54244678893851,"sku":"95-4901GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Red","offer_id":54244678926619,"sku":"95-4901QT","price":114.8,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54244678959387,"sku":"95-4902GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Blue","offer_id":54244678992155,"sku":"95-4902QT","price":114.8,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54244679024923,"sku":"95-4903GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Green","offer_id":54244679057691,"sku":"95-4903QT","price":116.8,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Yellow","offer_id":54244679090459,"sku":"95-4904GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Yellow","offer_id":54244679123227,"sku":"95-4904QT","price":114.8,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Deep Black","offer_id":54244679155995,"sku":"95-4905GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Deep Black","offer_id":54244679188763,"sku":"95-4905QT","price":116.8,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Bright White","offer_id":54244679221531,"sku":"95-4910GL","price":309.84,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Bright White","offer_id":54244679254299,"sku":"95-4910QT","price":114.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-4905GL-clean_c854e04e-01d1-404e-b08a-4dd6c4f7a15c.png?v=1792031043"},{"product_id":"sea-hawk-talon-semi-hard-ablative-bottom-paint","title":"Sea Hawk Talon Semi-Hard Ablative Bottom Paint","description":"\u003cp\u003eCopper-based hybrid ablative antifouling for prepared hulls in fresh and salt water. Its semi-hard coating is intended to control marine fouling while wearing gradually.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e33.6%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e398 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e359 sq. ft.\/gallon at 2.5 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e6030\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e6030QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e6041\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e6042\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e6043\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e6045\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e6045QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245133943067,"sku":"95-6030G","price":136.89,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Dark Blue","offer_id":54245133975835,"sku":"95-6030QT","price":53.89,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245134008603,"sku":"95-6041G","price":136.89,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245134041371,"sku":"95-6042G","price":136.89,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54245134074139,"sku":"95-6043G","price":136.89,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245134106907,"sku":"95-6045G","price":136.89,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245134139675,"sku":"95-6045QT","price":53.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-6045G-clean_bd1318e1-3c23-4888-ba15-5941737176bf.png?v=1792031033"},{"product_id":"sea-hawk-cukote-self-polishing-bottom-paint","title":"Sea Hawk Cukote Self-Polishing Bottom Paint","description":"\u003cp\u003eA semi-hard self-polishing ablative antifouling for prepared fiberglass, wood and steel hulls. Cukote supports multi-season use and can be hauled and relaunched without losing its antifouling properties.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e47.5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e346 sq. ft.\/gallon at 2.5 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eShark White\u003c\/td\u003e\n\u003ctd\u003e3410GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e3430GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e3430QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e3433GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eTeal\u003c\/td\u003e\n\u003ctd\u003e3434GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e3441GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e3442GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e3442QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e3445GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e3445QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Shark White","offer_id":54245134893339,"sku":"95-3410GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Dark Blue","offer_id":54245134926107,"sku":"95-3430GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Dark Blue","offer_id":54245134958875,"sku":"95-3430QT","price":91.25,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54245134991643,"sku":"95-3433GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Teal","offer_id":54245135024411,"sku":"95-3434GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245135057179,"sku":"95-3441GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245135089947,"sku":"95-3442GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Blue","offer_id":54245135122715,"sku":"95-3442QT","price":94.43,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245135155483,"sku":"95-3445GL","price":274.94,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245135188251,"sku":"95-3445QT","price":91.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-3445GL-clean_7cd1e4e6-8aed-46c4-9c3f-bebf03563604.png?v=1792031034"},{"product_id":"sea-hawk-tropikote-hard-antifouling-bottom-paint","title":"Sea Hawk Tropikote Hard Antifouling Bottom Paint","description":"\u003cp\u003eA hard modified-epoxy antifouling for prepared fiberglass, wood and steel hulls. Choose this hard-film system where the coating and maintenance plan call for high copper loading rather than a polishing ablative.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e75.8%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e288 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e320 sq. ft.\/gallon at 3.0 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e2140GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e2142GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e2145GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eHull and haul-out limits\u003c\/h3\u003e\u003cp\u003eTropikote is not recommended for aluminum hulls. Once a painted boat has been launched and is hauled again, limit air exposure to 72 hours. The technical sheet recommends an additional coat after longer air exposure before relaunching.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245135712539,"sku":"95-2140GL","price":364.55,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245135745307,"sku":"95-2142GL","price":364.55,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245135778075,"sku":"95-2145GL","price":364.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-2145GL-clean_908c09c7-fa18-4378-8b6d-21bae18c1dbf.png?v=1792031034"},{"product_id":"sea-hawk-islands-77-plus-self-polishing-bottom-paint","title":"Sea Hawk Islands 77 Plus Self-Polishing Bottom Paint","description":"\u003cp\u003eA tin-free self-polishing antifouling with dual-biocide technology for prepared boat bottoms. The 7700 Series provides multi-season protection; use the complete preparation and barrier system required for the hull material.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e38.06%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e377 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e7742GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e7745GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Blue","offer_id":54245136597275,"sku":"95-7742GL","price":435.85,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245136630043,"sku":"95-7745GL","price":435.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-7745GL-clean_26df7fc7-eec4-434a-9e6c-e24ea9e6900b.png?v=1792031033"},{"product_id":"sea-hawk-monterey-water-based-antifouling-bottom-paint","title":"Sea Hawk Monterey Water-Based Antifouling Bottom Paint","description":"\u003cp\u003eA water-based semi-hard ablative antifouling for prepared hulls. Monterey can be applied over compatible existing antifouling in sound condition and allows hauling without loss of antifouling performance.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e54.67%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e78 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e320 sq. ft.\/gallon at the recommended film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e5430GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e5430QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e5441GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e5442GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e5442QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e5443GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e5445GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e5445QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eThinning, cleanup and drying\u003c\/h3\u003e\u003cp\u003eUse water for cleanup. If the product label permits thinning, the technical sheet limits reduction to 10% water; do not substitute a solvent reducer. At 73°F (23°C), the pleasure-craft schedule gives a minimum of 12 hours before launching. Actual drying depends on the coating and application conditions.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245137088795,"sku":"95-5430GL","price":187.79,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Dark Blue","offer_id":54245137121563,"sku":"95-5430QT","price":70.92,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245137154331,"sku":"95-5441GL","price":187.79,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245137187099,"sku":"95-5442GL","price":187.79,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Blue","offer_id":54245137219867,"sku":"95-5442QT","price":65.92,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54245137252635,"sku":"95-5443GL","price":187.79,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245137285403,"sku":"95-5445GL","price":187.79,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245137318171,"sku":"95-5445QT","price":65.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-5445GL-clean_cdb8f267-14c2-4ca8-bb13-2444be4518ef.png?v=1792031034"},{"product_id":"sea-hawk-af33-multi-season-ablative-bottom-paint","title":"Sea Hawk AF33 Multi-Season Ablative Bottom Paint","description":"\u003cp\u003eA harder self-polishing ablative antifouling designed for workboats, daysailers and cruising vessels. Its durable coating provides multi-season fouling protection when applied as the specified hull system.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e33.6%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e398 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e359 sq. ft.\/gallon at 2.5 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e3330GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e3330QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e3341GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e3341QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e3342GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e3342QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e3343GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e3343QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e3345GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e3345QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245137809691,"sku":"95-3330GL","price":168.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Dark Blue","offer_id":54245137842459,"sku":"95-3330QT","price":59.47,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245137875227,"sku":"95-3341GL","price":168.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Red","offer_id":54245137907995,"sku":"95-3341QT","price":59.47,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245137940763,"sku":"95-3342GL","price":168.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Blue","offer_id":54245137973531,"sku":"95-3342QT","price":59.47,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54245138006299,"sku":"95-3343GL","price":168.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Green","offer_id":54245138039067,"sku":"95-3343QT","price":59.47,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245138071835,"sku":"95-3345GL","price":168.95,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245138104603,"sku":"95-3345QT","price":59.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-3345GL-clean_d0843d6f-ee13-4d39-b512-059b17a49901.png?v=1792031034"},{"product_id":"sea-hawk-sharkskin-hard-modified-epoxy-bottom-paint","title":"Sea Hawk Sharkskin Hard Modified Epoxy Bottom Paint","description":"\u003cp\u003eA copper-based hard modified-epoxy antifouling for prepared hulls in fresh and salt water. Sharkskin targets barnacles, weed and other marine fouling and can overcoat compatible existing antifoulants.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e45.2%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e365 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e320 sq. ft.\/gallon at 3.1 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e6140GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e6141GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e6142GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e6145GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eAfter hauling the boat\u003c\/h3\u003e\u003cp\u003eOnce the painted boat has been launched and is hauled again, limit air exposure to 72 hours. The technical sheet recommends another coat before relaunching after longer air exposure because the exposed coating can lose antifouling effectiveness.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245138759963,"sku":"95-6140GL","price":214.97,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245138792731,"sku":"95-6141GL","price":214.97,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245138825499,"sku":"95-6142GL","price":214.97,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245138858267,"sku":"95-6145GL","price":214.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-6145GL-clean_18b47c35-f5ec-461d-b6c9-cd71df357875.png?v=1792031034"},{"product_id":"sea-hawk-1280-marine-paint-stripper","title":"Sea Hawk 1280 Marine Paint Stripper","description":"\u003cp\u003eA thick paint-removing paste for multiple layers of bottom paint, topside coatings and varnish on suitable fiberglass, gelcoat, metal and wood surfaces. Test a small area before treating the full surface.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication temperature for best results\u003c\/th\u003e\n\u003ctd\u003e60–80°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical test dwell\u003c\/th\u003e\n\u003ctd\u003e30 minutes–6 hours; heavy coatings can take longer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003e50–75 sq. ft.\/gallon at 30 mils; 100–125 sq. ft.\/gallon at 10–15 mils\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleanup\u003c\/th\u003e\n\u003ctd\u003eSoap and water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eDo not use on rubber, linoleum, plastics or sheetrock. Keep the paste from drying prematurely; determine dwell time and film thickness with a test patch. Remove softened coating and clean with soap and water.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003e1280GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-surface-preparation\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245139317019,"sku":"95-1280GL","price":157.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-1280GL-clean_2626feb4-d87e-40db-9695-4a335433667b.png?v=1792031023"},{"product_id":"sea-hawk-2035-high-temperature-reducer","title":"Sea Hawk 2035 High Temperature Reducer","description":"\u003cp\u003eA slower-evaporating reducer for compatible Sea Hawk solvent-based coatings in temperatures above 85°F. Intended for Cukote, Tropikote, Biocop and Sharkskin where their coating instructions permit thinning.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature use\u003c\/th\u003e\n\u003ctd\u003eAbove 85°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum thinning\u003c\/th\u003e\n\u003ctd\u003e10%; obey any lower product-specific limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eUse with the specified coating\u003c\/h3\u003e\u003cp\u003eCheck the coating label before adding solvent. Reducers are not interchangeable simply because they are from the same brand. Do not exceed the coating’s permitted reduction; keep separate cleanup and application instructions.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003e2035QT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-paint-thinners-reducers\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Quart","offer_id":54245140922651,"sku":"95-2035QT","price":32.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-2035QT-clean_9782f5c4-b3d6-4ef1-bb00-37c9b1f55b23.png?v=1792031023"},{"product_id":"sea-hawk-2033-cool-weather-reducer-and-cleanup-solvent","title":"Sea Hawk 2033 Cool Weather Reducer and Cleanup Solvent","description":"\u003cp\u003eA faster-evaporating reducer for solvent-based bottom paint when temperatures are below 85°F. Use only where the selected coating instructions specify or permit this reducer.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eTemperature use\u003c\/th\u003e\n\u003ctd\u003eBelow 85°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum thinning\u003c\/th\u003e\n\u003ctd\u003e10%; obey any lower product-specific limit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eUse with the specified coating\u003c\/h3\u003e\u003cp\u003eCheck the coating label before adding solvent. Reducers are not interchangeable simply because they are from the same brand. Do not exceed the coating’s permitted reduction; keep separate cleanup and application instructions.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003e2033QT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-paint-thinners-reducers\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Quart","offer_id":54245141184795,"sku":"95-2033QT","price":26.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-2033QT-clean_46c5c960-77d0-46c3-99ee-b0ce7f53f6e3.png?v=1792031023"},{"product_id":"sea-hawk-s-76-tack-coat-primer-kit","title":"Sea Hawk S-76 Tack Coat Primer Kit","description":"\u003cp\u003eA two-component anti-corrosive tack-coat primer for properly prepared steel, aluminum and galvanized steel underwater surfaces, including hulls and running gear. It forms one stage of a coating system and is used with an additional suitable primer before antifouling.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKit yield\u003c\/th\u003e\n\u003ctd\u003e2 gallons total: base plus catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1, base to catalyst\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInduction\u003c\/th\u003e\n\u003ctd\u003e30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot life\u003c\/th\u003e\n\u003ctd\u003e3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e741 sq. ft.\/gallon at 1 mil dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSystem selection\u003c\/h3\u003e\u003cp\u003ePreparation, total dry-film thickness and the interval before applying the next coating determine system performance. Use the exact primer formulation and its compatible topcoat instructions. Water-based antifouling over Tuff Stuff requires the manufacturer’s dedicated procedure. A primer is not an antifouling finish.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eS76GLKIT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"2 Gallon Kit","offer_id":54245141512475,"sku":"95-S76GLKIT","price":841.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-S76GLKIT-clean_0f64ac35-f9f8-4325-a4aa-4c684ff4982b.png?v=1792031023"},{"product_id":"sea-hawk-s-90-low-voc-de-waxing-etch-and-cleaner","title":"Sea Hawk S-90 Low VOC De-Waxing Etch and Cleaner","description":"\u003cp\u003eA surface preparation cleaner for removing wax and contaminants before marine primer and paint application. Follow the specified cleaning and rinsing procedure for the substrate.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFormula\u003c\/th\u003e\n\u003ctd\u003eWater-based concentrated cleaner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLiquid color\u003c\/th\u003e\n\u003ctd\u003eLight red\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e316 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEtching dwell reference\u003c\/th\u003e\n\u003ctd\u003e3–5 minutes, followed by thorough clean-water rinsing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eS90GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-surface-preparation\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCleaning and de-waxing\u003c\/h3\u003e\u003cp\u003eFor general cleaning, apply with a clean cloth and rinse away the loosened contaminants. For the etching procedure, apply a thick wet coat, work the surface with the specified abrasive pad, allow 3–5 minutes and rinse away all residue. Follow the current label and allow the prepared surface to dry before coating.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245141774619,"sku":"95-S90GL","price":85.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-S90GL-clean_f4e5b2b4-d90f-4792-98bc-8dc64e96787a.png?v=1792031023"},{"product_id":"sea-hawk-tuff-stuff-high-build-epoxy-primer-kit","title":"Sea Hawk Tuff Stuff High-Build Epoxy Primer Kit","description":"\u003cp\u003eA two-part high-build epoxy primer for fiberglass blister prevention and repair and corrosion protection on prepared metals. The barrier system depends on achieving the specified dry-film thickness across the required coats.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1, Side A to Side C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKit contents\u003c\/th\u003e\n\u003ctd\u003eHalf-gallon kit: two quarts; two-gallon kit: two gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInduction\u003c\/th\u003e\n\u003ctd\u003e20–30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2–4, depending on service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e140 sq. ft.\/gallon at 6 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e444 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSystem selection\u003c\/h3\u003e\u003cp\u003ePreparation, total dry-film thickness and the interval before applying the next coating determine system performance. Use the exact primer formulation and its compatible topcoat instructions. Water-based antifouling over Tuff Stuff requires the manufacturer’s dedicated procedure. A primer is not an antifouling finish.\u003c\/p\u003e\u003ch3\u003eCoating window\u003c\/h3\u003e\u003cp\u003eAt 73°F (23°C), the technical sheet lists 3 hours minimum and 6 days maximum between primer coats, with a 24-hour maximum window for the specified solvent-based bottom paint. Confirm readiness and the exact system’s instructions before overcoating; water-based antifouling uses a different procedure.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eLight Gray\u003c\/td\u003e\n\u003ctd\u003e1284GLKIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eLight Gray\u003c\/td\u003e\n\u003ctd\u003e1284QTKIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e1285QT KIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e1285WGLKIT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"2 Gallon Kit \/ Light Gray","offer_id":54245142429979,"sku":"95-1284GLKIT","price":217.07,"currency_code":"USD","in_stock":true},{"title":"1\/2 Gallon Kit \/ Light Gray","offer_id":54245142462747,"sku":"95-1284QTKIT","price":84.65,"currency_code":"USD","in_stock":true},{"title":"1\/2 Gallon Kit \/ White","offer_id":54245142495515,"sku":"95-1285QTKIT","price":74.65,"currency_code":"USD","in_stock":true},{"title":"2 Gallon Kit \/ White","offer_id":54245142528283,"sku":"95-1285WGLKIT","price":202.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-1284GLKIT-clean_5dab2e91-c503-448d-9339-70e4ab18774f.png?v=1792031043"},{"product_id":"sea-hawk-s-80-wax-n-grease-killer","title":"Sea Hawk S-80 Wax N Grease Killer","description":"\u003cp\u003eA concentrated petroleum-based cleaner for wax, oil and surface contaminants before primer or paint application. Suitable for removing mold-release wax from new fiberglass hulls and cleaning stripped hulls.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProcedure\u003c\/th\u003e\n\u003ctd\u003eWash, rinse and dry first; apply with a clean cloth, then wash again and allow to dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e832 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eS80GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eS80QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-surface-preparation\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245143052571,"sku":"95-S80GL","price":56.04,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":54245143085339,"sku":"95-S80QT","price":21.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-S80QT-clean_76fe61b4-5739-4128-a720-fc662b279d87.png?v=1792031043"},{"product_id":"sea-hawk-barnacle-blocker-zinc-free-spray","title":"Sea Hawk Barnacle Blocker Zinc-Free Spray","description":"\u003cp\u003eA zinc-free coating for prepared underwater metals including running gear, lower units and trim tabs. The self-cleaning coating provides an anti-corrosive barrier; follow preparation and reapplication instructions.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage\u003c\/th\u003e\n\u003ctd\u003e12 oz aerosol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFormulation\u003c\/th\u003e\n\u003ctd\u003eZinc-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e12 oz\u003c\/td\u003e\n\u003ctd\u003e505A\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/underwater-metal-protection\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"12 oz","offer_id":54245144002843,"sku":"95-505A","price":28.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-505A-clean_e67dd51e-9bde-4418-8676-c63361171dbc.png?v=1792031032"},{"product_id":"sea-hawk-shawkocon-underwater-primer","title":"Sea Hawk Shawkocon Underwater Primer","description":"\u003cp\u003eA single-component anti-corrosive primer and sealer for underwater hull surfaces. It promotes adhesion over sound compatible existing antifouling and can serve as a conversion coat over older coatings; vinyl antifouling is excluded.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eGray Metallic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e1 as a sealer; 3–4 as a metal primer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e250 sq. ft.\/gallon at 2.5 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e420 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSystem selection\u003c\/h3\u003e\u003cp\u003ePreparation, total dry-film thickness and the interval before applying the next coating determine system performance. Use the exact primer formulation and its compatible topcoat instructions. Water-based antifouling over Tuff Stuff requires the manufacturer’s dedicated procedure. A primer is not an antifouling finish.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eSH984\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245144461595,"sku":"95-SH984GL","price":127.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-SH984GL-clean_fb689750-476b-47e9-9c2b-cd1b3261830c.png?v=1792031023"},{"product_id":"sea-hawk-smart-solution-metal-free-antifouling-bottom-paint","title":"Sea Hawk Smart Solution Metal-Free Antifouling Bottom Paint","description":"\u003cp\u003eA metal-free antifouling using nonmetallic biocides. Smart Solution is intended for prepared boat bottoms and can be used over compatible existing antifouling after the required cleaning and preparation.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBiocide type\u003c\/th\u003e\n\u003ctd\u003eMetal-free; copper-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e267 sq. ft.\/gallon at 3.78 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e328 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBright Red\u003c\/td\u003e\n\u003ctd\u003e4701\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBright Red\u003c\/td\u003e\n\u003ctd\u003e4701\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBright Blue\u003c\/td\u003e\n\u003ctd\u003e4702\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e4705\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Pint\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e4705\/PT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e4705\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e4710\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e4710\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e4730\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e4730\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eCleaning the coated hull\u003c\/h3\u003e\u003cp\u003eUse the boat regularly or gently wipe growth with a soft rag as needed. Avoid brushing, aggressive scrubbing or excessive cleaning, which can remove the coating. For prepared aluminum hulls, the manufacturer recommends the specified Tuff Stuff epoxy-primer system for adhesion.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Bright Red","offer_id":54245147410715,"sku":"95-4701GL","price":241.05,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Bright Red","offer_id":54245147443483,"sku":"95-4701QT","price":93.84,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Bright Blue","offer_id":54245147476251,"sku":"95-4702GL","price":252.57,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245147509019,"sku":"95-4705GL","price":252.57,"currency_code":"USD","in_stock":true},{"title":"1 Pint \/ Black","offer_id":54245147541787,"sku":"95-4705PT","price":53.09,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245147574555,"sku":"95-4705QT","price":93.84,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ White","offer_id":54245147607323,"sku":"95-4710GL","price":252.57,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ White","offer_id":54245147640091,"sku":"95-4710QT","price":93.84,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Dark Blue","offer_id":54245147672859,"sku":"95-4730GL","price":252.57,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Dark Blue","offer_id":54245147705627,"sku":"95-4730QT","price":93.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-4705GL-clean_8784b695-baa1-4a7f-a999-8ea62d7f6909.png?v=1792031043"},{"product_id":"sea-hawk-tuff-stuff-low-voc-epoxy-primer-kit","title":"Sea Hawk Tuff Stuff Low VOC Epoxy Primer Kit","description":"\u003cp\u003eA separate low-VOC formulation of the high-build two-part epoxy barrier primer. Use for fiberglass blister prevention or repair and corrosion protection on prepared metals, following the Low VOC system instructions.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eKit yield\u003c\/th\u003e\n\u003ctd\u003e1 gallon total: two half-gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1, Side A to Side C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInduction\u003c\/th\u003e\n\u003ctd\u003e20–30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2–4, depending on service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e140 sq. ft.\/gallon at 6 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e280 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSystem selection\u003c\/h3\u003e\u003cp\u003ePreparation, total dry-film thickness and the interval before applying the next coating determine system performance. Use the exact primer formulation and its compatible topcoat instructions. Water-based antifouling over Tuff Stuff requires the manufacturer’s dedicated procedure. A primer is not an antifouling finish.\u003c\/p\u003e\u003ch3\u003eCoating window\u003c\/h3\u003e\u003cp\u003eAt 73°F (23°C), the technical sheet lists 3 hours minimum and 6 days maximum between primer coats, with a 24-hour maximum window for the specified solvent-based bottom paint. Confirm readiness and the exact system’s instructions before overcoating; water-based antifouling uses a different procedure.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eLight Gray\u003c\/td\u003e\n\u003ctd\u003e1286\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon Kit\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e1287\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon Kit \/ Light Gray","offer_id":54245148557595,"sku":"95-1286GLKIT","price":117.15,"currency_code":"USD","in_stock":true},{"title":"1 Gallon Kit \/ White","offer_id":54245148590363,"sku":"95-1287GLKIT","price":117.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-1286GLKIT-clean_e5241e2d-40b8-479d-ba97-113b6f4eb5b4.png?v=1792031043"},{"product_id":"sea-hawk-biocop-tf-dual-biocide-bottom-paint","title":"Sea Hawk Biocop TF Dual-Biocide Bottom Paint","description":"\u003cp\u003eA tin-free dual-biocide antifouling with a harder self-polishing polymer binder for prepared boat bottoms. Biocop TF provides multi-season protection when applied in the appropriate complete hull system.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e38.06%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e377 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e315 sq. ft.\/gallon at 2.9 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e12011GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eLight Blue\u003c\/td\u003e\n\u003ctd\u003e12021GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Pint\u003c\/td\u003e\n\u003ctd\u003eLight Blue\u003c\/td\u003e\n\u003ctd\u003e1202-1\/PT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e12051GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Pint\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e1205-1\/PT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e12301GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003e12311GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Pint\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003e12311PT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003ctd\u003e1234-1 GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eTeal\u003c\/td\u003e\n\u003ctd\u003e12351GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Red","offer_id":54245149114651,"sku":"95-12011GL","price":352.75,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Light Blue","offer_id":54245149147419,"sku":"95-12021GL","price":352.75,"currency_code":"USD","in_stock":true},{"title":"1 Pint \/ Light Blue","offer_id":54245149180187,"sku":"95-12021PT","price":53.23,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245149212955,"sku":"95-12051GL","price":352.75,"currency_code":"USD","in_stock":true},{"title":"1 Pint \/ Black","offer_id":54245149245723,"sku":"95-12051PT","price":52.23,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Dark Blue","offer_id":54245149278491,"sku":"95-12301GL","price":352.75,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Gray","offer_id":54245149311259,"sku":"95-12311GL","price":352.75,"currency_code":"USD","in_stock":true},{"title":"1 Pint \/ Gray","offer_id":54245149344027,"sku":"95-12311PT","price":53.23,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Green","offer_id":54245149376795,"sku":"95-12341GL","price":336.48,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Teal","offer_id":54245149409563,"sku":"95-12351GL","price":352.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-12051GL-clean_2c25e7a6-23d9-4983-8587-36f3312aa15a.png?v=1792031042"},{"product_id":"sea-hawk-cukote-330-low-voc-bottom-paint","title":"Sea Hawk Cukote 330 Low VOC Bottom Paint","description":"\u003cp\u003eA separate 330 g\/L VOC formulation of Cukote self-polishing antifouling. Suitable for prepared fiberglass, steel and wood boat bottoms; it supports multi-season use and hauling without loss of antifouling properties.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSemi-gloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e47.57%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e330 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e346 sq. ft.\/gallon at 2.5 mils dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eDrying reference\u003c\/h3\u003e\u003cp\u003eFor the pleasure-craft schedule at a substrate temperature of 73°F (23°C), allow a minimum of 12 hours before launching. Drying varies with temperature, humidity, film thickness and ventilation. Use the label’s full recoat and launch schedule for the actual conditions; commercial applications require their own schedule.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eDark Blue\u003c\/td\u003e\n\u003ctd\u003e3430LGL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eTeal\u003c\/td\u003e\n\u003ctd\u003e3434LGL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eRed\u003c\/td\u003e\n\u003ctd\u003e3441LGL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003ctd\u003e3442LGL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e3445LGL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Dark Blue","offer_id":54245149933851,"sku":"95-3430LGL","price":283.09,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Teal","offer_id":54245149966619,"sku":"95-3434LGL","price":283.09,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Red","offer_id":54245149999387,"sku":"95-3441LGL","price":283.09,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Blue","offer_id":54245150032155,"sku":"95-3442LGL","price":283.09,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245150064923,"sku":"95-3445LGL","price":283.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-3445LGL-clean_ac39a7d2-022d-46c9-94f5-5807a96cd2b3.png?v=1792031043"},{"product_id":"sea-hawk-aluma-hawk-aluminum-boat-paint","title":"Sea Hawk Aluma Hawk Aluminum Boat Paint","description":"\u003cp\u003eA quick-drying corrosion-inhibiting coating that can serve as a primer or topcoat directly on properly prepared aluminum. Suitable above or below the waterline, including jon boats and pontoons. It contains no antifouling protection.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eFlat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended coats\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical coverage\u003c\/th\u003e\n\u003ctd\u003e770 sq. ft.\/gallon at 1 mil dry film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e413 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAntifouling\u003c\/th\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003ePrepare bare aluminum and other substrates according to the label. This is a non-antifouling coating; it does not prevent marine growth. At 75°F (24°C), the technical sheet lists 1 hour to touch dry and 6 hours before recoating or overcoating. Colder conditions extend these times.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eJon Boat Blue\u003c\/td\u003e\n\u003ctd\u003eAH7002QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eAH7005\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003eAH7005\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eAluminum Gray\u003c\/td\u003e\n\u003ctd\u003eAH7031\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eJon Boat Green\u003c\/td\u003e\n\u003ctd\u003eAH7033\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eJon Boat Tan\u003c\/td\u003e\n\u003ctd\u003eAH7050QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-topside-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Quart \/ Jon Boat Blue","offer_id":54245150851355,"sku":"95-AH7002QT","price":53.13,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ Black","offer_id":54245150884123,"sku":"95-AH7005GL","price":137.98,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Black","offer_id":54245150916891,"sku":"95-AH7005QT","price":60.13,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Aluminum Gray","offer_id":54245150949659,"sku":"95-AH7031QT","price":60.39,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Jon Boat Green","offer_id":54245150982427,"sku":"95-AH7033QT","price":60.39,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Jon Boat Tan","offer_id":54245151015195,"sku":"95-AH7050QT","price":53.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-AH7005GL-clean_be79d9a9-c817-4029-b551-3b919efdee5a.png?v=1792031043"},{"product_id":"sea-hawk-islands-44-tf-tin-free-bottom-paint","title":"Sea Hawk Islands 44 TF Tin-Free Bottom Paint","description":"\u003cp\u003eA tin-free dual-biocide self-polishing antifouling for prepared hulls in fresh, brackish and salt water. The TF formula is specifically intended to permit overcoating compatible older tin-based paint systems after correct preparation.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVOC\u003c\/th\u003e\n\u003ctd\u003e300 g\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuprous oxide\u003c\/th\u003e\n\u003ctd\u003e32.7%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003ePreparation and application\u003c\/h3\u003e\u003cp\u003eApply only to clean, dry, correctly prepared surfaces. Confirm compatibility with the existing bottom paint and use the specified primer or barrier system for the hull material. Copper-bearing antifouling must never contact bare aluminum; use only a system specifically approved for that hull. Mix thoroughly and follow the current label for coat count, film thickness, thinning and launching. Theoretical coverage does not include application losses.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003ctd\u003e1005TF\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/boat-outfitting-bottom-paint\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon \/ Black","offer_id":54245151080731,"sku":"95-1005TFGL","price":487.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-1005TFGL-clean_9cc78f34-a75f-4cee-87af-48adbe8c2b27.png?v=1792031043"},{"product_id":"sea-hawk-2053-voc-exempt-reducer","title":"Sea Hawk 2053 VOC-Exempt Reducer","description":"\u003cp\u003eA reducer for compatible Sea Hawk solvent-based coatings. Its VOC-exempt solvent formulation permits thinning where allowed by the exact coating system; use the coating label to determine the allowed amount.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\u003ctr\u003e\n\u003cth\u003eContainer\u003c\/th\u003e\n\u003ctd\u003e1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eUse with the specified coating\u003c\/h3\u003e\u003cp\u003eCheck the coating label before adding solvent. Reducers are not interchangeable simply because they are from the same brand. Do not exceed the coating’s permitted reduction; keep separate cleanup and application instructions.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003e2053\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-paint-thinners-reducers\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245151605019,"sku":"95-2053GL","price":115.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-2053GL-selected-package.png?v=1792032624"},{"product_id":"sea-hawk-2084-tuff-stuff-reducer","title":"Sea Hawk 2084 Tuff Stuff Reducer","description":"\u003cp\u003eA reducer intended for standard Sea Hawk Tuff Stuff epoxy primer. Keep it distinct from the reducer specified for the Low VOC formulation; choose the reducer from the exact primer technical instructions.\u003c\/p\u003e\u003ch3\u003eTechnical details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContainer\u003c\/th\u003e\n\u003ctd\u003e1 gallon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem\u003c\/th\u003e\n\u003ctd\u003eStandard Tuff Stuff 1284\/1285; verify the current thinning bulletin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eUse with the specified coating\u003c\/h3\u003e\u003cp\u003eCheck the coating label before adding solvent. Reducers are not interchangeable simply because they are from the same brand. Do not exceed the coating’s permitted reduction; keep separate cleanup and application instructions.\u003c\/p\u003e\u003ch3\u003eSizes, colors and part numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003e2084\/GL\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-paint-thinners-reducers\"\u003erelated coatings and preparation products\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sea Hawk","offers":[{"title":"1 Gallon","offer_id":54245152620827,"sku":"95-2084GL","price":67.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-95-2084GL-selected-package.png?v=1792032632"}],"url":"https:\/\/partsduck.com\/collections\/sea-hawk.oembed","provider":"PartsDuck.com","version":"1.0","type":"link"}