{"title":"Interlux Primers and Barrier Coats","description":"\u003cp\u003e\u003ca href=\"\/collections\/interlux\"\u003eAll Interlux Products\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eFind primers and epoxy barrier-coat systems for suitable marine substrates. Check whether the listing is a complete kit, a base or a curing agent. Preparation and coating compatibility depend on the chosen product.\u003c\/p\u003e","products":[{"product_id":"interlux-interprotect-2000e-kit","title":"Interlux InterProtect 2000E Kit Epoxy Primer","description":"\u003cp\u003eA two-part epoxy barrier primer for fiberglass hulls, with additional applications on properly prepared metal and wood.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eAirless Spray, Brush, Conventional Spray, Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eTwo-part kit; select the listed kit quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e3:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eDo not apply over one-part paint. The required film build and overcoat interval depend on whether the job is hull barrier protection, metal priming or another specified use.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eBlister prevention\/corrosion system: build to 10 mils total dry film, typically 4–5 roller coats or 2–3 spray coats. Substrate priming before fairing and the specified no-sand system use a different schedule.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eTheoretical: 240 ft² per US gallon by brush; 135.6 by airless spray. Practical airless spray: 105.8 ft² per US gallon.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat (mixed system)\u003c\/th\u003e\n\u003ctd\u003e2.6 mils dry by brush \/ roller, 5.4 mils dry by spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e3 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMix base and curing agent 3:1 by volume, then allow the specified 20-minute induction period. Do not apply over one-part coatings. Antifouling overcoat windows depend on temperature and the next paint; use the system chart for the selected topcoat.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eY2000EKIT\/1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eY2000EKIT\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eY2002EKIT\/1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eY2002EKIT\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Gallon \/ Gray","offer_id":54242008432923,"sku":"94-2000E01EG","price":133.64,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ Gray","offer_id":54242008465691,"sku":"94-2000E01EQ","price":51.45,"currency_code":"USD","in_stock":true},{"title":"1 Gallon \/ White","offer_id":54242008498459,"sku":"94-2002E01EG","price":133.64,"currency_code":"USD","in_stock":true},{"title":"1 Quart \/ White","offer_id":54242008531227,"sku":"94-2002E01EQ","price":51.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-2000E_01EG_Kit.jpg?v=1792010239"},{"product_id":"interlux-interprotect-2000voc-kit","title":"Interlux InterProtect 2000VOC Kit Epoxy Primer","description":"\u003cp\u003eA reduced-VOC two-part epoxy barrier primer for protecting fiberglass hulls against water absorption.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eAirless Spray, Brush, Conventional Spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eTwo-part kit; select the listed kit quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e3:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eDo not apply over one-part paint. This is the 2000VOC system; choose the matching components and its own application schedule.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eBuild the barrier system to 10 mils total dry film; coat count depends on application method and achieved film build.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eTheoretical mixed-system coverage: 243.4 ft² per US gallon by brush; 180 by spray.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat (mixed system)\u003c\/th\u003e\n\u003ctd\u003e2.6 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e3 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMix the matching base and curing agent 3:1 by volume. Use the 2000VOC system instructions for thinning, induction and overcoating; do not transfer another primer’s schedule.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eY2000VOCKIT\/1\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Gallon \/ Gray","offer_id":54242010497307,"sku":"94-Y2000VOCKITG","price":143.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/Webversion_3-InterProtect2000VOC_Family.png?v=1792010278"},{"product_id":"interlux-interior-primer-860-converter-part-b","title":"Interlux Interior Primer 860 Converter Part B","description":"\u003cp\u003eThe separately sold YIC861 converter component for the Interior Primer 860 two-part epoxy system. The matching base is required and is sold separately.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eConverter Part B only; matching component required separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e4:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eFor the Interior Primer 860 epoxy system. Do not apply over one-pack products; the base and converter are separately identified components.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eMixed primer system: 1 coat as specified for the substrate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eMixed system: practical 205 ft² per US gallon by brush or 134.3 by spray; theoretical 228.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat (mixed system)\u003c\/th\u003e\n\u003ctd\u003e5 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHard Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e60 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e60 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe complete coating system mixes base with YIC861 converter 4:1 by volume. The base and converter listings are separate components; each requires its matching partner. Preparation and cure figures describe the mixed system.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e22 oz.\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eYIC861\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-paint-activators\"\u003ePaint Activators and Curing Agents\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"22 oz. \/ White","offer_id":54242013348123,"sku":"94-YIC861Q","price":48.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YIC861Q.jpg?v=1792010312"},{"product_id":"interlux-interior-primer-860-base-part-a","title":"Interlux Interior Primer 860 Base Part A","description":"\u003cp\u003eAn epoxy primer for marine interior coating systems. Select the required base or converter component.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eBase Part A only; matching component required separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e4:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eFor the Interior Primer 860 epoxy system. Do not apply over one-pack products; the base and converter are separately identified components.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eMixed primer system: 1 coat as specified for the substrate.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eMixed system: practical 205 ft² per US gallon by brush or 134.3 by spray; theoretical 228.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat (mixed system)\u003c\/th\u003e\n\u003ctd\u003e5 mils dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHard Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2.5 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e60 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e60 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eThe complete coating system mixes base with YIC861 converter 4:1 by volume. The base and converter listings are separate components; each requires its matching partner. Preparation and cure figures describe the mixed system.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eYIC862\/1\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Gallon \/ White","offer_id":54242013380891,"sku":"94-YIC862G","price":183.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YIC862G.jpg?v=1792010312"},{"product_id":"interlux-interprotect-hs-kit","title":"Interlux InterProtect HS Kit Epoxy Primer","description":"\u003cp\u003eA high-solids, two-part epoxy primer for suitable barrier-coat and metal-protection applications.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eAirless Spray, Brush, Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eTwo-part kit; select the listed kit quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e2:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eUse the HS system instructions for required film build and overcoating. Do not substitute the thumb-print timing used with other InterProtect systems.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eBelow-waterline barrier system: 10 mils wet film \/ 7 mils dry film per specified application; follow the HS system schedule.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003e151 ft² per US gallon at 10 mils wet \/ 7 mils dry film in the specified below-waterline system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 77°F (25°C)\u003c\/th\u003e\n\u003ctd\u003e3 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHard Dry at 77°F (25°C)\u003c\/th\u003e\n\u003ctd\u003e6 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 77°F (25°C)\u003c\/th\u003e\n\u003ctd\u003e1 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMix base and curing agent 2:1 by volume. Use the HS overcoat schedule; the InterProtect 2000E thumbprint method is not the HS instruction.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eYPA423KIT\/1\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Gallon \/ Gray","offer_id":54242014527771,"sku":"94-YPA423KITG","price":158.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YPA423KITG.jpg?v=1792010314"},{"product_id":"interlux-primocon","title":"Interlux Primocon","description":"\u003cp\u003eAn anticorrosive primer for appropriately prepared underwater metal surfaces and selected antifouling systems.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eAirless Spray, Brush, Conventional Spray, Roller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eMatch the underwater substrate and antifouling system, then follow the appropriate preparation and coat schedule.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule\u003c\/th\u003e\n\u003ctd\u003e1–5 coats depending on substrate and system; not one universal coat count.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield\u003c\/th\u003e\n\u003ctd\u003ePractical: 301.2 ft² per US gallon by brush; 142.5 by spray. Theoretical: 339.1 by brush; 179.1 by spray.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDry film per coat\u003c\/th\u003e\n\u003ctd\u003e1.6 mils dry by brush \/ roller, 3 mils dry by spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003ePrepare underwater metal or fiberglass using the specified substrate schedule. Do not overcoat with vinyl antifoulings such as VC Offshore, Baltoplate or VC 17, or with two-part epoxies. Spray application needs longer drying and minimum overcoating times than brush\/roller application.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Gallon\u003c\/td\u003e\n\u003ctd\u003eYPA984\/1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eYPA984\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Gallon","offer_id":54242014560539,"sku":"94-YPA984G","price":127.7,"currency_code":"USD","in_stock":true},{"title":"1 Quart","offer_id":54242014593307,"sku":"94-YPA984Q","price":39.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YPA984G.jpg?v=1792010314"},{"product_id":"interlux-primocon-aerosol","title":"Interlux Primocon Aerosol","description":"\u003cp\u003eAn aerosol anticorrosive primer for suitably prepared underwater metals, including appropriate outdrive applications.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eAerosol can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eAn underwater-metal primer in aerosol form. Do not use beneath vinyl-based antifoulings such as VC Offshore or Baltoplate.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule\u003c\/th\u003e\n\u003ctd\u003e3–4 coats; use the specified full-can schedule for a lower unit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e1 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eFor the specified underwater metal\/drive primer system. Do not overcoat with VC Offshore, Baltoplate, VC 17 or two-part epoxy products.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e12 fl. oz.\u003c\/td\u003e\n\u003ctd\u003eYPA985N\/16\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003eMarine Primers, Undercoats and Barrier Coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"12 fl. oz.","offer_id":54242014691611,"sku":"94-YPA985","price":32.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YPA985.jpg?v=1792010356"},{"product_id":"interlux-interprotect-hs-base","title":"Interlux InterProtect HS Epoxy Primer — Base, 2 Gallons","description":"\u003cp\u003eThe gray base component of the two-part InterProtect HS epoxy primer system. This listing supplies 2 US gallons of YPA420 base only. YPA422 curing agent is required and sold separately.\u003c\/p\u003e\u003ch3\u003eSystem details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied component\u003c\/th\u003e\n\u003ctd\u003eYPA420\/2GLUS base, 2 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixed-system finish\u003c\/th\u003e\n\u003ctd\u003eGray, satin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMix ratio\u003c\/th\u003e\n\u003ctd\u003e2 parts base to 1 part YPA422 curing agent by volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixed-system volume solids\u003c\/th\u003e\n\u003ctd\u003e66%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAt 77°F (25°C)\u003c\/th\u003e\n\u003ctd\u003e3 hours touch dry; 6 hours hard dry; 1 hour pot life. Times apply to the mixed system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and use\u003c\/h3\u003e\u003cp\u003eUse the properly mixed system as a compatible primer above or below the waterline and as part of the specified blister-protection or metal-corrosion-protection system. Prepare each substrate according to the product label. For topside finishing, overcoat InterProtect HS with the specified Epoxy Primekote system. Recoat intervals depend on temperature, immersion and the coating applied over the primer; follow the exact product instructions.\u003c\/p\u003e\u003cp\u003eThis component is supplied separately from the one-gallon InterProtect HS kit.\u003c\/p\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-primers-barrier-coats\"\u003emarine primers and barrier coats\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"2 Gallons \/ Gray","offer_id":54245862146331,"sku":"94-YPA420G","price":373.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-94-YPA420G-selected-package.png?v=1792032641"}],"url":"https:\/\/partsduck.com\/collections\/interlux-primers-barrier-coats.oembed","provider":"PartsDuck.com","version":"1.0","type":"link"}