{"title":"Interlux Fillers and Seam Compounds","description":"\u003cp\u003e\u003ca href=\"\/collections\/interlux\"\u003eAll Interlux Products\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eChoose fillers for shallow repairs, epoxy repair systems or compounds for wooden hull seams. Above-waterline and below-waterline seam products serve different applications. Check component and quantity details.\u003c\/p\u003e","products":[{"product_id":"interlux-surfacing-putty","title":"Interlux Surfacing Putty","description":"\u003cp\u003eFill shallow gouges and small fastener holes in wood or fiberglass before painting.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eKnife\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eUse on prepared bare wood or fiberglass for shallow imperfections. Do not apply over existing paint; use with single-part primers and finishes.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule\u003c\/th\u003e\n\u003ctd\u003eAs required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield\u003c\/th\u003e\n\u003ctd\u003eTheoretical yield: 60 ft² per US gallon at 60 mils thickness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e30 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eApply with a knife to prepared, primed surfaces and allow to dry before sanding. Use for minor surface imperfections within the compatible paint system.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Pint\u003c\/td\u003e\n\u003ctd\u003eY257\/PT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-repair-fairing\"\u003eMarine Repair Compounds and Fairing\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Pint","offer_id":54242007056667,"sku":"94-257P","price":39.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-257P.jpg?v=1792010240"},{"product_id":"interlux-seam-compound-brown","title":"Interlux Seam Compound Brown","description":"\u003cp\u003eA flexible compound for seams in wooden boat bottoms and keel joints below the waterline.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eKnife\/ Spatula\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eFor primed wooden hull seams below the waterline. Do not apply to bare wood or use under VC Offshore or Baltoplate vinyl antifoulings.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule\u003c\/th\u003e\n\u003ctd\u003eAs required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield\u003c\/th\u003e\n\u003ctd\u003eTheoretical yield: 60 ft² per US gallon at 60 mils thickness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eUse a knife or spatula in correctly caulked wooden-hull seams below the waterline. This is a seam compound, not a substitute for structural caulking.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eBrown (below)\u003c\/td\u003e\n\u003ctd\u003eY30\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-sealants-bedding\"\u003eMarine Sealants, Bedding and Seam Compounds\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Quart \/ Brown (below)","offer_id":54242008662299,"sku":"94-30Q","price":63.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-31Q.jpg?v=1792010240"},{"product_id":"interlux-seam-compound-white","title":"Interlux Seam Compound White","description":"\u003cp\u003eFill wooden hull seams above the waterline with a compound that accommodates plank movement.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eKnife\/ Spatula\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eFor primed wooden hull seams above the waterline. Do not apply to bare wood.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule\u003c\/th\u003e\n\u003ctd\u003eAs required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield\u003c\/th\u003e\n\u003ctd\u003eTheoretical yield: 60 ft² per US gallon at 60 mils thickness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e2 hrs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eUse a knife or spatula in correctly caulked wooden-hull seams above the waterline. Verify the product name and selected part number; do not infer use from an older package photograph.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1 Quart\u003c\/td\u003e\n\u003ctd\u003eWhite (above)\u003c\/td\u003e\n\u003ctd\u003eY31\/QT\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-sealants-bedding\"\u003eMarine Sealants, Bedding and Seam Compounds\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1 Quart \/ White (above)","offer_id":54242008695067,"sku":"94-31Q","price":65.56,"currency_code":"USD","in_stock":true}]},{"product_id":"interlux-interfill-833-base-part-a","title":"Interlux Interfill 833 Base Part A","description":"\u003cp\u003eA finishing filler for smoothing minor surface defects over an appropriate Interfill fairing system.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eBase Part A only; matching component required separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eUse the matching Interfill 833 curing component. Apply within the specified epoxy fairing system; this listing is the base component only.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eAs required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eTheoretical mixed-filler yield: 13 ft² per US gallon at 1\/8 inch thickness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e50 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMix the matching YAA813 base and YAA814 curing component 1:1 by volume. Use over the specified cured epoxy fairing or primed surface. This listing supplies base only; it is not a complete mixed filler kit.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e1\/2 Gallon\u003c\/td\u003e\n\u003ctd\u003eYAA813\/HG\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-repair-fairing\"\u003eMarine Repair Compounds and Fairing\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"1\/2 Gallon","offer_id":54242011021595,"sku":"94-YAA813HG","price":139.6,"currency_code":"USD","in_stock":true}]},{"product_id":"interlux-watertite-kit","title":"Interlux Watertite Kit","description":"\u003cp\u003eA two-part epoxy filler for repairs to suitable fiberglass, metal and rigid wood constructions.\u003c\/p\u003e\u003ch3\u003eProduct Details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eMatte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication methods\u003c\/th\u003e\n\u003ctd\u003eSpatula \/ Putty Knife\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied form\u003c\/th\u003e\n\u003ctd\u003eTwo-part kit; select the listed kit quantity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume; use the matching base and curing component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and Application\u003c\/h3\u003e\u003cp\u003eOvercoat within the specified epoxy system. Do not apply topside finishes, polyester or vinylester materials directly over Watertite.\u003c\/p\u003e\u003cp\u003eFollow the product label and technical instructions for preparation, mixing, application conditions and overcoating intervals.\u003c\/p\u003e\u003ch3\u003eApplication Reference — Mixed System\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCoat schedule (mixed system)\u003c\/th\u003e\n\u003ctd\u003eAs required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCoverage \/ yield (mixed system)\u003c\/th\u003e\n\u003ctd\u003eTheoretical mixed-filler yield: 25 ft² per US gallon at 1\/16 inch thickness.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTouch Dry at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e35 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePot Life at 73°F (23°C)\u003c\/th\u003e\n\u003ctd\u003e15 mins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eMix the two components 1:1 by volume. Once cured and sanded, overcoat with a specified compatible epoxy. Do not apply gelcoat, polyester, vinyl ester or topside finish directly over the filler.\u003c\/p\u003e\u003cp\u003eCoverage is per coat unless a filler thickness is stated. Theoretical figures exclude application losses; practical yield varies with surface, film build and method.\u003c\/p\u003e\u003cp\u003eDrying figures are reference values at the stated temperature. Recoating, sanding and launch have separate requirements; follow the selected product label and coating-system schedule.\u003c\/p\u003e\u003ch3\u003eOptions and Part Numbers\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003eManufacturer Part Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 ml\u003c\/td\u003e\n\u003ctd\u003eYAV135KIT\/500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLitre\u003c\/td\u003e\n\u003ctd\u003eYAV135KIT\/L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-repair-fairing\"\u003eMarine Repair Compounds and Fairing\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"500 ml","offer_id":54242011054363,"sku":"94-YAV135500","price":54.74,"currency_code":"USD","in_stock":true},{"title":"Litre","offer_id":54242011087131,"sku":"94-YAV135L","price":92.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/94-YAV135500.jpg?v=1792010277"},{"product_id":"interlux-interfill-830-base","title":"Interlux Interfill 830 Lightweight Epoxy Fairing Compound — Base, 2 Gallons","description":"\u003cp\u003eThe separately supplied base component for the two-part Interfill 830 epoxy fairing system. Mix with the specified standard or fast curing component for profiling suitable steel, aluminum and composite hull surfaces above or below the waterline. This listing supplies two gallons of base only.\u003c\/p\u003e\u003ch3\u003eProduct and system details\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSupplied component\u003c\/th\u003e\n\u003ctd\u003eYAA867\/2 base, 2 US gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSystem mix ratio\u003c\/th\u003e\n\u003ctd\u003e1:1 by volume; Fast Cure system weight ratio 1.17:1 base to YAA869\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMixed-system volume solids\u003c\/th\u003e\n\u003ctd\u003e91%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum application thickness\u003c\/th\u003e\n\u003ctd\u003e800 mils per application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTheoretical mixed-system coverage\u003c\/th\u003e\n\u003ctd\u003e8.1 sq. ft.\/gallon at 200 mils wet film thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eSelection and use\u003c\/h3\u003e\u003cp\u003eUse over properly cured compatible epoxy primers or cured composite. Do not thin. For underwater use, seal and overcoat the faired surface with the specified epoxy-primer system. Do not wet-mix standard and fast curing systems to alter cure time. The curing agent is sold separately.\u003c\/p\u003e\u003ch3\u003eSupplied component\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\u003ctr\u003e\n\u003ctd\u003e2 Gallons\u003c\/td\u003e\n\u003ctd\u003eYAA867\/2\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eBrowse \u003ca href=\"\/collections\/marine-repair-fairing\"\u003erelated coatings and components\u003c\/a\u003e or \u003ca href=\"\/collections\/marine-paint-coatings\"\u003eall marine paint and coatings\u003c\/a\u003e.\u003c\/p\u003e","brand":"Interlux","offers":[{"title":"2 Gallons","offer_id":54245355258139,"sku":"94-YAA8672G","price":398.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0943\/8652\/0347\/files\/partsduck-94-YAA8672G-selected-package.png?v=1792032561"}],"url":"https:\/\/partsduck.com\/collections\/interlux-fillers-seam-compounds.oembed","provider":"PartsDuck.com","version":"1.0","type":"link"}